Stepper Linear Actuators

WELCOME TO DINGS’ MOTION USA

Products Available

DINGS’ hybrid stepper linear actuators come in six sizes, from 16 mm square to 86 mm square corresponding to Nema size 6, size 8, size 11, size 14, size 17, size 23, and size 34. Each size typically has three to four form factors available – external, non-captive, captive, and electric cylinder versions.

There are over thirty different travels per step available, from. 00006 inch (.001524 mm) to .005 inch (.127 mm). Microstepping can be used for even finer resolution.

For less environmentally friendly applications of stepper linear actuators, the housings are coated with epoxy resin primer and blue polyurethane finish with thickness of 0.1 - 0.15 mm. Coated surfaces can withstand salt spray and the motor wiring utilizes Industrial M12 Circular connectors.

For Higher Duty Cycle and Faster thrust loads, we suggest our Ball Screw Series of Stepper Linear Actuators.

The Ball Screw Stepper Linear Actuators are offered on the “External type” Linear Actuator. There are 6 different sizes, from Nema 6 to Nema 23. Also, there are a variety of linear resolutions from 0.005mm/ step to 0.1mm/step available. Maximum thrust forces up to 400lbsF. Encoder options and other customizations are available for all versions.

We manufacture three sizes of permanent magnet / can stack stepper linear actuators; 20mm, 25mm, and 36mm. Also, three form factors are offered as well; non-captive, external, and Kaptive. Lead resolution options are from 0.00625 to 0.3333 mm/full step. Linear thrust forces can be attained as high as 25lbsF.

These are extremely cost effective solutions for short quick movements with typical light thrust loads.

Hybrid Stepper Lead Screw Linear Actuators

IP54 Linear Actuators

Stepper Ball Screw Linear Actuators

Can Stack Linear Actuators

Additional Information

DINGS’ MOTION offers a unique line of stepper motor linear actuators that opens new avenues for equipment designers who require high performance and exceptional endurance in a very small package.

One of the most common methods of moving a load from Point A to Point B is through linear translation of a motor by a mechanical lead screw and nut. Our various stepper motor linear actuators convert the rotation movement to linear motion directly on motor, with engineered thermoplastic nuts and a stainless steel acme lead screw. This allows the stepper motor linear actuator to provide quiet, efficient, durable and cost effective linear motion solutions.

These stepper motor linear actuators are ideal for applications requiring a combination of precise positioning, rapid motion and long life. Typical applications include X-Y tables, medical equipment, semiconductor handling, telecommunications equipment, valve control, and numerous other uses.

A variety of customizations are available upon to request, such as different screw length, special design nut, anti-backlash nut, safety brake, encoder, etc. For higher efficiency and extreme long life and high precision applications, DINGS’ provides the stepper motor linear actuator with different grade of ball screw at reasonable cost.

Read more about how to select the right linear motion system for your application, what selection considerations to be aware of and force and speed requirements for your linear actuator application.

For a quote for a custom stepper motor linear actuator solution specific to your application click the “Request a Quote” button below and fill out the form.

Still can’t find what you need?